Description

Excellent condition, Adult Owned, rarely used, has been in storage. Key Features Directional Video Condenser Microphone Mounts to Standard Camera Shoe 3.5mm Mini Plug Studio-Quality Sound 9V Battery Powered Integrated Shock Mount Can Be Mounted on a Boompole A 3/8" thread at the base of the shockmount allows you to use the VideoMic on any standard boompole. With the addition of a longer 1/8" male to female stereo mini-plug cable (like the Rode VC1), and a boompole (Like the Rode Mini Boom), you can radically improve the audio in your video work. A special 1/8" mini-plug to XLR adapter (the Rode VXLR) is also available to use the VideoMic on a professional camera. Replaceable rubber O-rings suspend the microphone on the shockmount and protect against noise due to movement and handling. An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt battery (sold separately). The microphone will run for approximately 100 hours on a single battery. Barrel Canceling Pick Up The Rode Video Mic functions as a true line plus gradient microphone with a super-cardioid pattern in the front and a barrel that cancels side-audio. The result is maximum pick up of the source in highly ambient and noisy environments. Integrated Shock-Mount The VideoMic features a permanently attached shock mount with a camera mounting shoe underneath. The shock mount features replaceable rubber o-rings that protect against noise caused by abrupt movement and shock. High Pass Filter Switch A high-pass filter switch eliminates room ambiance and noise below 80Hz. This results in improved intelligibility while recording around machinery, wind or close proximities. Internal Power The condenser element is powered with a standard 9-volt battery for up to 100 hours (approximately).